Due To Setup Issues, Rockspace Extender Go Offline?

Date:

Share post:

Is your rockspace WiFi range extender also facing an issue? Most of the users face the same issues during the rockspace extender setup process. So, don’t worry we are here with a number of tips. Read this article attentively,

Let’s Start,

Daily Issues While Rockspace Extender Setup

  • Rockspace WiFi extender does not work properly.
  • Extenders keep cutoff.
  • Website of the rockspace extender does not work properly as it should.
  • Issue during extender connects to internet.
  • Power LED light of the extender blinks red.

How To Solve Extender Go Offline Issue?

  • Placement Between Host Router And Extender

Best location to place your extender is the central location between your router and computer. Make sure that extender must be in the range of the router. 

Tip; If you are using a different location then move your extender closer to the device but still in the reach of the router.

  • Update The Software Of Extender

Due to outdated software of the extender, the rockspace WiFi extender went offline. If you want to know how to update the software of an extender,

Note: If you are using rockspace ac1200 extender setup then follow these step carefully.

  1. First you have to login the extender page by typing IP address in the web browser.
  2. After that, pick an administration option.
  3. Under this option select the option of firmware update.
  4. Enter the install button and it will take 2-3 minutes to upgrade the firmware of the extender.
  5. During the time of updating firmware your rockspace WiFi extender will reboot.
  6. Make sure that you don’t switch off the power, apart from that there is a chance of an extender malfunction.

Tip: After trying these two tips if you are unable to solve the offline issue then these are the few more tips. Before trying these few tips  firstly you have to login re.rockspace.local which is an official website of rockspace extender in the web browser and go to the settings of an extender,

  1. Check the speed limit of the extender.
  2. Change the frequency bands if it might be wrong.
  3. Change your old password or extender and enter a new password.
  • Reset Rockspace WiFi Extender
  1. First, you have to put out the plug of an extender from the power outlet.
  2. After these locate the reset pinhole at the back side of the extender.
  3. Press and hold the reset button for 8-10 seconds with the help of a paper clip.
  4. After this your rockspace AC1200 extender will reboot.
  5. After the reset of the extender your extender will ask you to set it up again. If you don’t know how to setup rockpsace extender then follow these,

Setup Rockspace WiFi Extender 

  • First You have to connect rockspace ac1200 extender setup with your computer and mobile phone.
  • Connect your extender to the WiFi of your mobile phone.
  • After this open your web browser and enter re.rockspace.local in the address bar of the web browser.
  • Now you see a login page will open on your screen. 
  • Enter the required credentials which are shown on them.
  • After doing this you can easily change any settings of an extender

If you want to increase the range of the router then connect your extender to the router, There are two methods by which you connect your extender to the router.

  1. WPS.
  2. Ethernet cable.

If you are thinking to do the first method to connect extender with router via WPS then do this,

Make sure that first you have to check the WPS button on your router if it does not support it then replace your old router with new one. 

  • First put in the plug of the extender in the power socket.
  • After this press the WPS of the extender.
  • Now within 2 minutes press the WPS button on your router. 
  • Now put out the plug of the extender and place your extender to a new location.

If you fail while doing the first method then try the second method to connect your extender via ethernet. Follow these steps to connect your extender with the router via ethernet cable.

  • Join an ethernet cable which comes with your extender to the ethernet port of the router. 
  • Now join the other end of the cable to the ethernet port of an extender.
  • After these connect your extender to the power socket.
  • As a result you can easily connect the extender to the router.

Conclusion

After trying all these few tips,We hope you can solve your issue but if you are still facing an issue then there is a last option but not least contact your internet service provider. After this your service provider will give you a solution to solve this issue. Stay tuned for further updates.

How to Brostrend AC1200 Reset

spot_img

Related articles

Due To Setup Issues, Rockspace Extender Go Offline?

Is your rockspace WiFi range extender also facing an issue? Most of the users face the same issues...

How to Brostrend AC1200 Reset

How to Prepare? 30 seconds of reset button pressing. Switch on the router, hold for 30 seconds, then...

How to Increas Netgear Extender WiFi Speed

In this post, we will go over every crucial component of enhancing the speed of your Netgear WiFi....

Electronic Chemicals and Materials Industry Future Insights in 2022

Recently published a research report titled, “Electronic Chemicals and Materials Industry – Global Size, Share, Growth, Opportunities Analysis in 2022”....